Heavy Duty Mitre Gauge
-Heavy Duty Cast Iron Mitre Gauge 3/4" x 3/8" x 18" bar. weight, 4 lb 8 oz Automatic stops at 90 and 45 degrees
|
|
Mitre Gauge
- Cast and machined body fits 3/8" x 3/4" T-slot
- Adjustable spring loaded stops at 0°, 15°, 22-1/2°,30°, 45°, 60° left and right
- Long 18" bar with removable washer for use without T-slot
- 7-1/2" face on gauge body
|
|
Percision Mitre Gauge
- Sliding fence with adjustable flip stop
- Preset detents at 0°, 15°, 22-1/2°, 30°, 45°
- Hold down with quick release for fast adjustment
|
|
Router Table Stand
- 32" high x 20-1/2" width x 18-1/2" depth
- Pre drilled holes
- Steel construction
- Adjustable feet
|
|
Featherboard
-Featherboard Clamp - Holds work securely tight to the fence.
10.5" long with 3/4 track
|
|
Mobile Base
The dimensions of the base cabinet is 24" wide x 18" deep. The mobile base has 4 casters (not exactly as pictured) that will move only from front to back, not side to side . You can have the table against wall or in a small space between machines. When routing something long you can pull the unit out from the wall so you have room on both sides of the router bit. If ordered, the mobile base will come assembled on the unit so there is no extra charge on the shipping.
|
|
Universal Mobile Base
- 400 lb capacity
- Double locking cam lift
- 4 - 3" polyurethane wheels (2 swivel and 2 straight)
- Adjustable 12" to 52"
- 4 leveling pads
- Excellent for table saws, radial arm saws, band saws, drill presses and jointers
- Assembly required
|
|
Insert Plates
Insert plate size 3/8 x 9 1/4 x 11 3/4. 3 sizes available Blank, 2" and 3.5" center hole. If table purchased prior to 2003 old insert size were 3/8 x 7 7/8 x 12.
|
|
Large Lower Drawer
The Drawer is on Heavy Duty Full Extension Drawer Slides.
Great for storing extra routers. No more kneeling down and reaching back to retrieve what may be hiding back there.
|
|
Safety Paddle Switch
-It comes with a removable yellow lock to prevent unwanted start ups.
|
|
Large Knobs
Add the 2.5" Knobs to your order. Much easier to loosen and tighten your fence in place. The 5/16th wing nuts work fine but as the arthritis sets in these are easier. For easy removable of the fence for free hand work or clamping.
|
|
Fence Slider
Order extra sliders and cutout bit profile into it so that you can have "0" clearence. Simply ease the cutter into the bit.
|
|
Fence Top Attachment
Received a number of request from our customers who have previously bought the RT1000 Series of Router Table to adapt an accessory to enable the use of the new T Track with their fence. This attachment will fit on all our models. It is 30" long, 1 1/2 wide and 1" in height. It comes with 6 pre-drilled countersunk holes for easy attachment to your existing fence. If you received the featherboard attachment board with your fence you will have to remove this. This new attachment is in stock and ready for shipment.
|
|
|
