RT-1000SE Magazine Special
Most popular model of the RT1000 Series of Router Tables. As seen in the Canadian Woodworking Magazine RT-1000 Woodworking
|
The RT-1000SE Router table will be an excellent addition for your woodworking shop. This very well made table is constructed using 18mm Baltic Birch Plywood and 3/4 Industrial grade Melamine. All the joints are dado, rabbet, glued and brad nailed. The base cabinet, table and fence are trimmed in solid Black American walnut and Rock Maple. With the RT-1000SE routing is "SAFER and EASIER". It stands 35" tall. Its top is just the right size, 32" wide x 24" deep x 1.5" thick for stability and flatness. The top is wrapped in 3/4" thick walnut.
|
The RT-1000SE unit weighs over 110 lbs. It has a 3.5" dust port on the left side for attaching your vacuum system (easily adapted to 4"). There are 5 drawers in the RT-1000SE. 2 drawers hold 44 -- 1/4 router bits. 2 drawers hold 28-- 1/2" router bits. If you prefer you can ask for all 1/2 or all 1/4 drawers. One drawer to store your wrenches, template guides, bearings etc. The large lower drawer is included and is mounted on full extension drawer slides. The vented acrylic glass door covering the router compartment is hinged and has a magnetic catch to hold the door closed. There are two electrical plugs in the base cabinet that are controlled by an external Safety Paddle switch and an 8 foot power cord wired for 110 volts.
|
The new safety paddle switch is also included with each RT-1000SE Special Magazine model. It comes with a removable yellow lock to prevent unwanted start ups.
|
The RT-1000SE Special model come with two 2.5" knobs for easy removable of the fence for free hand work or clamping.
|
Each sliding fence on this split fence system can be adjusted up to 3/4" for glue joint work. More importantly, it will go back to a straight edge in seconds. For vertical panel a high fence can be easily adapted. The fence will open from 0 to 5". It moves back and forth 5" for those odd shapes, and free hand work. Best of all this unit will still collect 99% of the saw dust. There is a 3/4 " aluminum Miter track that runs the length of the table for your miter gauge. Also included is a aluminum t-track that runs the length of the fence.
|
The insert is made out of 3/8 Lexan unbreakable, stronger then Plexi, easily drilled and most importantly no sagging. Size is 9 1/4 x 11 3/4 x 3/8 same size as the popular router lifts on the market. All makes and models of routers fit our units. We have several templates and may be able to pre drill for your router at no additional cost.
To ask any questions on the RT-1000SE Special call us at 1-877-418-2932 or email joe@rt1000.com There is no duty, brokerage, tariffs to the USA on any of our RT1000 Models.
Canadian Residents will be charged GST or HST
|
