|
The RT1000XL would be an excellent addition to any woodworking shop. Cabinet,
table and fence are trimmed in solid Black American Walnut and clear White Maple. | 
The
RT1000XL stands 35" from floor to top of the table surface. Add 4" with the fence, which is included. The table top is 32"
wide x 24" deep , hefty 1.1/2" thick for stability and flatness. This unit weighs in over 125 lbs 
The
cabinet is constructed using 18 mm Baltic birch plywood. This plywood is 13 layers of solid veneers ply's The shelves and
uprights are made of 3/4" industrial grade melamine. Joints are dado, rabbet, glued and brad nailed very well built |
There are 5 drawers in our router tables. 2 drawers hold 44 -- 1/4 router bits. 2 drawers hold 28--
1/2" router bits. We can modify these in case you prefer all 1/2 drawers. One drawer to store your wrenches, template guides,
bearings etc. The large lower drawer is included with the XL and is mounted on heavy duty full extension
drawer slides. Great for storing extra routers. | | 
The RT1000XL model that comes with a Miter-T-Track
for those miter gauges that have a t-slot bar. Standard miter gauges will also work with this track. There are two electrical
outlets in the base cabinet that are controlled by a Safety Paddle Switch It has a removable yellow
lock to prevent unwanted start ups. Also a 8 foot power cord wired for 110-120 volts. 
The
insert plate is made out of 3/8 Lexan. Very strong and has 8 leveling set screws. One insert is included with each router
table. There are 3 sizes available. (Blank), (2") and (3.5") opening. If not specified at point of sale a 2" will be included
with each order. Insert size is 9 1/4" x 11 3/4" x 3/8". The Same size as most popular router lifts.
2
1/4" star knobs for locking down the fence | | 
The RT1000XL has a 3.5" dust port on the left side
for attaching your vacuum system (easily adapted to 4"). It has a 2.5" port cut in the top under the fence, incase you want
to use a smaller hose (shop vac). There are 3 vented holes in the acrylic door, allowing air flow to circulate witch keeps
the router compartment free of dust. The(hinged)door covering the router compartment has a magnetic catch to hold the door
closed | 
The fence includes an alum. t-track for attaching feather boards, stops,
guards and other fences and jigs. Each sliding fence on this split fence system can be adjusted over 1/2" for glue joint work.
More importantly, it will go back to a straight edge in seconds. For vertical panel a high fence can be easily adapted, 3
T-bolts are included. You can make it the hight you need. 
The fence sliders will open from 1/2" to 5". You
can be set it up 1/2" in front of the bit, for taking multiple passes and slide back as much as 5" for routing inside front
edge. For those odd shapes or free hand work, set it completely back and wide open this unit will still collect 99% of the
saw dust. |
The bottom cabinet comes fully
assembled and packaged in a box surrounded in Styrofoam. 24" x 21" x 35" The top is shipped in a separate box. 35" x 26" x
5.5" After receiving your RT1000XL, it may takes 10 to 15 minutes to assemble the top to the lower cabinet using the supplied
hardware and mounting instructions, then your ready to go. | |   | |
Return to Top
|
